Floor Buffing Pads
|
Floor Buffing Pads
The floor buffing pads are abrasive disc used with buffing machine to polish a floor.The success in good floor maintenance is to know which colour pad to use on a particular floor. The difficulty arise in the fact that there are many colour of buffing pads to choose from. Furthermore, two wooden floor might look the same but they are each of different type of wood. This has to be recognise for efficient floor care. There are blue, red or white floor buffing padsCan't do without them  The blue pad These floor buffing pads has to be used with a bit of water. My theory is that there is an inversely proportional relationship between the brightness of the colour of the floor buffing pads and the application of water on the floor. The buffing system to use for best effect is to spray buff. It is more convenient to use a spray gun. This will enable a very small layer of the liquid covering a relatively large area. This area has to be buffed immediately. When choosing the blue pad among the floor buffing machine pads, one has to try and find the buffing machines of very high speed. Only one trigger of the spray gun should be used for at least 4 to 6 meter square. This will keep the pad dry and hence polishing the surface it is in contact with. Amongst the floor buffing pads, the blue is at a threshold of being a scrubbing pad or a polishing pad. It can be used for both tasks. It is one of the most use buffing machines pads.
The red pad The red floor buffing pads are recognized as being the pads for buffing purposes. The red pad is  softer than the blue pad. The floor buffing pads have to be used with as less water on the floor as possible. The red floor buffing pads need less water than the blue buffing machine pads. The higher the speed of its buffing machine,such as burnishing, the more the floor shines. It is recommended that the surfaceprecautions such as placing the wet warning signs must be observed. When the buffing is finished, the red pad should not be very dirty when it is taken off the machine. Clean it gently with a amp cloth and store it. Avoid washing it because it would lose a lot of its texture. Hang the floor buffing pads to dry.
 The floor buffing pads of this colour can be used on floor and carpet. This is the softest of the floor buffing pads. For that reason, the white pad is sometimes used on carpet. On a floor with a small traffic, the white buffing machine pads can be used on their own to maintain the shine. A floor with a large traffic will have many marks on the floor. The white floor buffing pads are too soft to remove marks from the floor. In this situation the red buffing pads or the blue floor buffing pads are more appropriate. The white floor buffing pads can be used as a complement. This means to buff the floor with a red pad initially and buff the floor again with a white buffing machine pads. |
|