Hard Wood Floor Cleaner
The hard wood floor cleaner used on a surface is of utmost importance. A good hard wood floor cleaner should make the design on the floor easily visible and clean.
The Trusted Cleaners
Any hard wood floor cleaner is better than any detergent solution. Detergent should be avoided. I have used detergent on wooden floor. The result was having a white and rough wooden floor and a deformation of the surface because of the water. Furthermore the edges and the corners were not of a uniform color. Using too much water should be avoided as well. Water left on the wood could raise the wood or render it more brittle. Some very few hard wood floor cleaner have to be diluted. But even so the diluted solution applied on the wood should be very small.
The light from the wood
Before using any hard wood floor cleaner, one should always start by vacuuming the floor and making sure that the brushes of the head of the machine are out. These will avoid any possible scratch being left on the surface. In the occasion that one comes across stains, they can either be removed by soapy water or a cloth in warm water. A gentle circular motion scrubb should suffice. The soap for the soapy water should be neutral. I even diluted a little bit of hand soap in water and apply the very minimum of it to remove the stain.
The Best Floor Tool
A hard wood floor cleaner solution such as the Mop and Glo or Bona can be recommended. It should be first verified that the floor is not polyurethane or urethane seal.These types of finish must not have any wax apply on them.
They can be recognized by the fact that smear marks are not easily left on
these type of sealed floor. A mop should be put in a bucket and pour a bit of Mop and Glo or such as the
and then squeeze the mop in the ringer to dampen the whole mop. From then on, the hard wood floor cleaner should poured directly to the floor. It ought to be reminded that before using any hard wood floor cleaner, the manufacturers instruction must be read. With such an efficient floor care, the end result will be a long lasting shiny wooden floor.
The equipment for wood
Another hard wood floor cleaner is the Bissell 482 Wood Floor Solutions. It can only be used for sealed floor. This hard wood floor cleaner can be applied in two methods. It can be poured directly on the floor using the method above. It can also complement the Bissell Flip It hard wood floor cleaner. This is a machine into which the solution can be poured into. It will spray, it will clean and it wlll collect the water. In short, it's an excellent cleaner. Buffing the floor can be the next step to obtain a glass looking floor. A high speed machine is required. A red pad will easily shine the floor. A white pad will be too soft. I always recommend spray buffing. Hence put a hard wood floor cleaner such as Mop and Glow in a spray gun. The spraying should as minimum as possible.
Tips for urethane and other finishes
The hard wood floor cleaner for a urethane or polyurethane finish floor has to be recommended by the manufacturer. The floor should be vacuumed regularly or dust mop swept initially. Spray buff the floor using this hard wood floor cleaner. This type of finish, also called surface finish, is therefore easy to maintain. No wax or wet mop are to touch the surface. Avoid dragging heavy stuff and clean any spillage immediately. It is recommended to have the urethane laid yearly. In the rare occasion that there is mark on the floor, wipe it gently following the lines on the floor using the recommended hard wood floor cleaner. A product that conforms is the
